Flat Rock Trailers

Information

24'L x 8.5'W x 84"H Nominal Dimensions with 5’ - 'A' Frame Tongue

TRAILER CHASSIS & FRAMEWORK:

- Trailer GVWR to be 12,000 lb
- Trailer Chassis to be a Standard Bumper Pull
- 6"x2"x 0.125" Steel Tubing to Form Main Trailer Chassis Frame
- Reinforcement at Running Gear and Landing Gear Locations
- Steel and Aluminum floor framework integral to chassis
- Utilize SPUR transition technology fully welded
- Includes 3ft Rear dove tail
- Fabricate Aluminum Wheel Well covers
- Fabricate and Install 4"W Rear posts and formed header
- Supply and Install 2 5/16" Coupler
- Supply and Install Tandem (2) - 6000Lb Torsion Axles
- Spread axle design
- Upstart angle for lower floor height
- Electric Brakes on each axle
- Supply and Install 4 - Aluminum Rims rated
- Supply and Install 4 - Rated Radial Tires to match LRE
- Supply and Install 12V Powered jack hidden
- Supply and Install Rated Safety Chains
- Trailer Wiring to Meet FMVSS
- Upgrade to LED Lighting Package
- Standard RV Trailer 7-Prong Connection
- Supply and Install Emergency Breakaway Kit
- Chassis Painted Black Prior to body installation

BODY CONSTRUCTION:

- Fabricate wall framework with 1.5" Aluminum square tubing and angle with
gussets and reinforcing where necessary.
- Custom sloped and tapered Front with 14ga ATP rock guard
- Fabricate Body walls using 0.080" Piedmont Sheets bonded to
Aluminum Formed Wall studs.
- Includes matching rear post and header cladding
- COLOR BLACK
- Utilize screwless Adhesive method with upper and lower mechanical fasteners at
roof edge and bottom skirting.
- Fabricate Roof using Standard Aluminum Roof edge extrusion with
custom welded and formed rear corners and Crowned roof bows. Roof
sheeted with 18Gauge Aluminum Roof Skin.
- Rear spoiler included
- Use Cast aluminum tapered corners for roof.
- Standard trim package including aluminum bottom rail and color matched
front corner posts.

FLOORING:

- Supply and Install 3/4" DryMax Plywood throughout
- Supply and Install Black Coin Pattern flooring throughout
- Standard 4 - D-rings in floor

DOORS & COMPARTMENTS:

- Fabricate and Install Single Entry Door on Curbside
- 32"W x 72"H Nominal Dimensions
- Installed at Curbside Front
- Utilize Standard Aluminum Extrusion construction
- Utilize Standard Stamped SS Hinges on Right side
- Utilize RV paddle latch with dead bolt
- Supply and install additional bar lock assembly (Black)
- Fabricate and Install Rear Ramp Door
- HD Construction with Spring Assist and SS Continuous hinge
- Aluminum Extrusion Construction with Plywood Decking
and Black rubber coin flooring
- Dual SS Handle hardware locking
- Add aluminum hinge transition cover
- Add HD Ramp flap
- Fabricate and Install Side vehicle access Door on Roadside
- 88"W x 72"H Nominal Dimensions
- Installed at Roadside at wheel wells
- Includes electrically operated wheel well that is designed
to liftup and stay attached to the access door. Push button
operation.
- Utilize Standard Aluminum Extrusion construction
- Utilize Standard continuous hinge at top
- Fabricate and Install Access door on front wall
- 48"W x 36"H Nominal Dimensions
- Utilize Standard Aluminum Extrusion construction
- Utilize Standard Stamped SS Hinges on top for lift up
- Utilize Slam latch hardware
- Supply and install gas shocks for door prop

INTERIOR INSULATION & LINING:

- No Insulation
- Supply and Install Aluminum lining throughout
- Black Piedmont screwless
- Supply and install Full height cabinet at front
- Supply and install standard base cabinet at front